LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> A4 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Horns >> Communication (Sedan) >> 91 Communication >> Navigation System >> Navigation System Control Module, Removing And Installing >> Navigation System with CD Drive Control Module -J401-, REMOVING AND INSTALLING, MMI, THROUGH 11/03/2008 >> Removing

Navigation System with CD Drive Control Module -J401-, REMOVING AND INSTALLING, MMI, THROUGH 11/03/2008: Removing

-- Open the left storage compartment in the luggage compartment.

-- Loosen the nuts -1-, -2-, -4- and -5- on the infotainment rack -3-.

Fig 1: Identifying Nuts On Infotainment Rack
GWWA91-10939Courtesy of AUDI OF AMERICA, LLC

-- Tilt the rack -3- into the luggage compartment until the connectors on the Navigation System with CD Drive Control Module -J401- are accessible.

-- Disconnect the connector from the MOST bus.

-- Insert the Fiber-Optic Repair Set - Connector Protective Caps VAS6223/9 -1- onto the MOST bus connector -2-.

Fig 2: Fiber-Optic Cable Harness Connector And Protective Cap For Cable Connector VAS 6223/9
GWWA97-0760Courtesy of AUDI OF AMERICA, LLC

-- Release and disconnect the remaining connectors from the Navigation System with CD Drive Control Module -J401-.

-- Insert two clips from the Radio Removal Tool T10057 into release slots on Navigation System with CD Drive Control Module -J401- until they engage. Points on the grip eyelets of tool face outward.

Fig 3: Inserting Radio Release Tool T10057 Clips Into Slots Of Navigation System With CD Drive Control Module J401 Until They Engage
GWWA91-10059Courtesy of AUDI OF AMERICA, LLC

-- Pull Navigation System with CD Drive Control Module -J401- out of the rack.

-- Remove Radio Removal Tool T10057 by pressing locking tabs on Navigation System with CD Drive Control Module -J401-.