LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> TT Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Electrical >> Horns >> Communication (Roadster) >> 91 Communication >> Removal And Installation >> Navigation System With Cd Drive Control Module

Navigation System With Cd Drive Control Module

Special tools and workshop equipment required 

-- If control module is replaced, select Replacement function for appropriate control module in Guided Fault-Finding routine.

Use the Vehicle Diagnosis, Testing and Information System to do so.

-- Switch off all electrical consumers.

-- Remove the key.

Removing 

-- Insert radio removal tool into release slots on navigation system with cd drive control module until they engage. Points on grip eyes face outward.

Fig 1: Insert Radio Removal Tool Into Release Slots On Navigation System With CD Drive Control Module Until They Engage
GWWA91-10714Courtesy of AUDI OF AMERICA, LLC

-- Remove the navigation system with cd drive control module from the instrument panel using the grip eyes on the radio removal tool.

-- Release electrical connectors on navigation system with cd drive control module and remove it.

-- Remove radio removal tool by pressing locking tabs on navigation system with cd drive control module.

-- Remove front passenger's airbag disabled indicator lamp. Refer to FRONT PASSENGER AIRBAG DISABLED INDICATOR LAMP .

Installing 

-- Install front passenger's airbag disabled indicator lamp. Refer to FRONT PASSENGER AIRBAG DISABLED INDICATOR LAMP .

-- Connect all electrical connectors.

-- Slide navigation system with cd drive control module straight into instrument panel until it engages in installation frame.