Fastener Tightening Specifications

Component	Bolt Size	Nm
Bolts and Nuts
	M6	9
	M7	15
	M8	20
	M10	40
	M12	65
Bracket for the Electrical Connector
-Nut	-	23
-Double Bolt¹	-	50 + 90°
Engine Carrier¹	-	120 + 180°
Engine Mount, Left	-	60
Engine Mount, Right	-	60
Ground Strap	-	15
Left Engine Support, Nut	-	75
Right Engine Support
Nut	-	75
Bolt¹	-	50 + 90°
¹ Always replace

Battery Jump Start Terminal -U6- Pins

-- Tighten the bolt -1- for the battery jump start terminal to 15 Nm.

Fig 1: Battery Jump Start Terminal -U6- Pins

GWWA10-10483

Courtesy of AUDI OF AMERICA, LLC

Ground Connection in the Right of the Plenum Chamber

-- Tighten the nut -2- to 9 Nm.

Fig 2: Location of Engine Control Module (ECM) -J623- -1-

GWWA24-10207

Courtesy of AUDI OF AMERICA, LLC

Ground Connection on the right Longitudinal Member

Fig 3: Identifying Ground (GND) Cable On Longmember

GWWN10-10018

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the nut -1- to 15 Nm.

Engine to Automatic Transmission 09D

Fig 4: Bolt Removal Sequence

GWWA10-10497

Courtesy of AUDI OF AMERICA, LLC

Item	Bolt	Nm
1, 2	M10x70	45
3, 4, 5, 7	M12 x 80	80
6	M12x70	80
8, 9, 10	M10x70	45
A	Alignment sleeves for centering

Engine and 8-Speed Automatic Transmission 0C8

Fig 5: Identifying Engine/Transmission Connecting Bolts -3 To 10

GWWA37-11119

Courtesy of AUDI OF AMERICA, LLC

Item	Bolt	Nm
1	M10x70	65
2	M10x90	65
3, 4, 5, 7	M12 x 80	80
6	M12x70	80
8, 9, 10	M10x70	45
A	Alignment sleeves for centering