LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q5 3.2 >> Repair and Diagnosis >> Electrical >> Body Electrical >> Wiring >> 97 Wiring >> Control Modules >> Comfort System Central Control Module -J393-, REMOVING AND INSTALLING >> Removing

Comfort System Central Control Module -J393-, REMOVING AND INSTALLING: Removing

Fig 1: Removing/Installing Comfort System Central Control Module
GWWA97-10655Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition and remove the key.

-- Open the luggage compartment right side trim.

-- Release the clips -arrows- and pull out the Comfort System Central Control Module -J393- -4- from the frame.

-- Carefully disconnect electrical harness connector -1- and -3- and antenna connector -7-.

-- Disconnect the connectors -2, 5 and 6-.

-- To disconnect the connector, press the tab -1-, turn the retaining bracket in direction of -arrow- and remove the connector.

Fig 2: Catch And Retainer
GWWA90-0199Courtesy of AUDI OF AMERICA, LLC

-- Remove the Comfort System Central Control Module -J393-.