2.0L - Generic Scan Tool - Engine Code(S): CAEB

• Generic Scan Tool
  • General Information
    • Notes
    • Safety Precautions
    • Clean Working Conditions
    • On Board Diagnostic Systems
    • Malfunction Indicator Lamp Illumination
    • Controller Area Network Data Link
    • Electronic Power Control Warning Lamp
  • Description And Operation
    • Notes
    • Fuel Supply System
    • Evaporative Emission System
    • Electronic Engine Power Control
    • Fuel Injection System
    • Engine Control Module
    • Exhaust System Components
    • Secondary Air Injection System
    • Ignition System
    • Automatic Transmission
  • Diagnosis And Testing
    • Preliminary Check
    • Readiness Code
    • Diagnostic Modes 01 - 0A
      • Notes
      • Diagnostic Mode 01 - Read Current System Data
      • Diagnostic Mode 02 - Read Operating Conditions
      • Diagnostic Mode 03 - Read DTC Memory
      • Diagnostic Mode 04 - Erase DTC Memory
      • Diagnostic Mode 05 - Read Oxygen Sensor Monitoring Test Results
      • Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions
        • Notes
        • Monitor-ID $01 (01): Oxygen Sensor Monitor Bank 1 - Sensor 1
        • Monitor-ID $02 02: Oxygen Sensor Monitor Bank 1- Sensor 2
        • Monitor-ID 03 : Oxygen Sensor Monitor Bank 1- Sensor 3
        • Monitor-ID $21 33: Catalytic Converter Monitoring
        • Monitor-ID $35 (53) : Cam Shaft Adjustment
        • Monitor-ID $3A (58) : Fuel Tank EVAP System Integrity/Leak Test (0.90”)
        • Monitor-ID $3B (59) : Fuel Tank EVAP System Integrity/Leak Test (0.40/1.0mm)
        • Monitor-ID $3C (60) : Fuel Tank EVAP System Integrity/Leak Test (0.20/0.5mm)
        • Monitor-ID $3D (61) : EVAP Valve Function Check
        • Monitor-ID $41 (65) : Oxygen Sensor Heater Monitor Bank 1 - Sensor 1
        • Monitor-ID $42 (66): Oxygen Sensor Heater Monitor Bank 1 - Sensor 2
        • Monitor-ID $43 (67) : Oxygen Sensor Heater Monitor Bank 1 - Sensor 3
        • Monitor-ID $71 (113) : Secondary air system (only SULEV)
        • Monitor-ID $A2 (162): Mis-Fire Cylinder 1 Data
        • Monitor-ID $A3 (163): Mis-Fire Cylinder 2 Data
        • Monitor-ID $A4 (164): Mis-Fire Cylinder 3 Data
        • Monitor-ID $A5 (165): Mis-Fire Cylinder 4 Data
      • Diagnostic Mode 07 - Read Faults Detected During The Current Or Last Driving Cycle
      • Diagnostic Mode 08 - Request Control Of On-Board System, Test Or Component
        • Notes
        • Function Test
      • Diagnostic Mode 09 - Read Vehicle Information
      • Diagnostic Mode 0A - Check Permanent DTC Memory
    • DTC Tables
      • Fuel, Air Mixture, And Additional Emissions Regulations
      • Ignition System
      • Additional exhaust regulation
      • Speed And Idle Control
      • Control Module And Output Signals
      • Fuel And Air Ratios, Control Module
      • Fuel And Air Mixture, Additional Emissions Regulations
      • Fuel and air ratio
      • Additional Emission Regulations
    • Diagnostic Procedures
      • Camshaft Adjustment Valve 1, Checking
      • Camshaft Position Sensor - (G40) - , Checking
      • Camshaft Adjustment Actuators, Intake, Checking
      • Camshaft Adjustment Actuators, Exhaust, Checking
      • Speed Signal, Checking
      • Can Bus Terminal Resistance, Checking
      • Catalytic Converter, Checking
      • Turbocharger, G-Charger
      • Charge Air Pressure Sensor, Checking
      • Turbocharger Recirculating Valve, Checking
      • WASTEGATE Bypass Regulator Valve, Checking
      • Engine Coolant Temperature Sensor, Checking
        • Notes
        • Testing If Display Is Approx. - 40.0° C
        • Testing If Display Approx. 140.0° C
        • Final Procedures
      • Engine Speed Sensor, Checking
      • Evaporative Canister Purge Regulator Valve, Checking
      • Evaporative System, Checking For Leaks
      • Evaporative Emission Canister System, Checking For Proper Seal
      • Fuel Injectors, Checking
      • Fuel Pressure Sensor, Checking
      • Low Fuel Pressure Sensor, Checking
      • Fuel Pressure Regulator Valve, Checking
      • Fuel Quality Sensor, Checking
      • Fuel Pump Delivery Quantity, Checking
      • Fuel Pressure Test
      • Fuel Pump Electrical, Testing
      • Transfer Fuel Pump, Checking
      • Fuel Pump Control Module, Checking
      • Ignition Coil With Power Output Stage, Checking
      • Intake Air Temperature Sensor, Checking
        • Notes
        • Testing If Display Approx. -40° C Or Approx. -46° C:
        • Testing If Display Approx. 140° C:
        • Final Procedures
      • Intake Manifold Runner Position Sensor, Checking
      • Intake Manifold Runner Control Valve, Checking
      • Knock Sensor 1, Checking
      • Leak Detection Pump, Checking
      • Mass Air Flow Sensor, Checking
        • Notes
        • Checking voltage supply
        • Checking Electrical Circuit
        • Final Procedures
      • Oxygen Sensor After Catalytic Converter, Checking
      • Heated Oxygen Sensor Ho2S, Checking
      • Oxygen Sensor O2S Behind Three Way Catalytic Converter, Checking
      • Oxygen Sensor O2S Heater, Checking
      • Oxygen Sensor O2S 1 Heater Before Catalytic Converter, Checking
      • TCM To ECM Can Bus Terminal Resistance, Checking
      • Accelerator Pedal Position Sensor/Accelerator Pedal Position Sensor 2, Checking
      • Throttle Valve Control Module, Checking
      • Voltage Supply, Checking
      • Engine Control Module, Replacing
      • Engine Component Power Supply Relay, Checking
      • Safety Precautions