LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A8 Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transmission - Controls & Housing >> 37 Controls, Housing >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

Component Fastener Size Nm
ATF cooler - 8
ATF drain plug 2 - 12
ATF cooler - 8
ATF pipes 3
  - 8
  - 20
ATF pipes 4 - 8
Brace for left transmission mount - 20
Brace for right transmission mount - 20
Emergency release lever, nut - 2.5
Drain plug for the transmission fluid inside the transfer case - 12
Drain plug for the hole for checking and filling - 30
Drain plug for the hole for checking and filling for the transmission fluid inside the front final drive - 10
Drain plug for the hole for checking and filling, for the transmission fluid inside the transfer case 2 - 27
Front emergency release cable - 9
Heat shield - 10
Left transmission support 1
- Bolt - 20
- Bolt - 40
Left transmission mount - 20
Lower stop for the rear transmission mount 2 - 20 + 90°
Mounting, transmission to the 3.0L TFSI engine - Refer to Attaching the Transmission to a 3.0L TFSI Engine 
Mounting, transmission to a 4.0L TFSI engine or to a 4.2L FSI Engine - Refer to Attaching the Transmission to a 4.0LTFSI/4.2LFSI Engine 
Mounting, transmission to the 6.3L FSI engine - Refer to Mounting, Transmission toe 6.3L FSI Engine 
Oil drain plug for the ATF in the transmission - 12
Oil drain plug for the ATF in the transmission for the transmission fluid inside the transfer case 2 - 12
Rear transmission support
Nut - 20
Bolt - 40
Selector Lever Sensor System Control Module -J587- tightening specification and sequence - Refer to Figure
Right transmission mount - 20
Right transmission support - 20
Selector lever handle lower section - 7
Selector mechanism function unit - 8
Selector Lever Release Button -E681- and Selector Lever Transmission Range Position Display Unit -Y26- - 0.25
Transmission support 5
Bolt - 40
Nut - 20
Tunnel crossmember
  M10 x 55 8.8 40
  M10 x 40 10.9 70
Nut - 20
Bolts and nuts
  M6 9
  M7 15
  M8 20
  M10 40
  M12 65