Calibration Requirements

• The camera lens must be clean. Cleaning
• The vehicle must be standing on a firm and level surface.
• There must be enough clearance around the vehicle (at least 2 meters).
• The parking brake must be set.
• The steering wheel must be in the 0 position and the wheels must be straight.
• All doors and the rear lid must be closed.
• No one should be in the vehicle.
• The vehicle must not be loaded (curb weight).
• Connect the battery charger.
• Ignition switched on.

Special tools and workshop equipment required 

• Calibration ToolVAS6350
• Vehicle Diagnostic Tester

The Calibration ToolVAS6350 consists of the following parts:

• Calibration Tool - Wheel Center MountingsVAS6350/1
• Calibration Tool - Spacing LaserVAS6350/2
• Linear LaserVAS6350/3A