REAR DISPLAY Multimedia Display Unit 1 -Y22- /Multimedia Display Unit 2 -Y23-, REMOVING AND INSTALLING: Removing

The display is attached to the front seat backrest by a retainer. It is not necessary to remove the retainer.

The display -1- is attached at the back with the cover -3-. Make sure the lower tabs -4- on the display -1- are pushed in first into the grooves -2-. Then install the other tabs -arrows-.

Fig 1: Identifying Multimedia Display Unit 1/2 -Y22- / -Y23-, Removing And Installing

Courtesy of AUDI OF AMERICA, LLC

-- Carefully unclip the cover -2- on the display -1- using the Trim Removal Wedge3409 -arrows-.

Fig 2: Unclipping Cover -2- On Display -1- Using Trim Removal Wedge3409 -Arrows-

Courtesy of AUDI OF AMERICA, LLC

Two screws -arrows- attach the display -1- to the bracket -4-.

Fig 3: Locating Screws, Display And Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2- and slide the display -1- upward slightly until the connectors lock into place.

Fig 4: Locating Bolts -2- And Slide Display -1- Upward

Courtesy of AUDI OF AMERICA, LLC

-- Unlock and disconnect the connectors -2 and 3- on the back on the display -1-.

Fig 5: Locating Screws, Display And Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Remove the display completely from the bracket.