LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A7 >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation & Air Conditioning (Air Guide, Coolant Circuit, Display&Control Head,Additional Components) >> 87 Air Conditioning >> Display And Control Head >> Display And Control Head, Removing And Installing >> Rear A/C Display Control Head -E265-, Removing And Installing >> Installing

Rear A/C Display Control Head -E265-, Removing And Installing: Installing

Installation is done is reverse order, observe the following:

-- Note the exact allocation when replacing the Rear A/C Display Control Head -E265-.

Always perform the following work after replacing/installing the Rear A/C Display Control Head -E265-. Use the Vehicle Diagnostic Tester in "Guided Fault Finding" function.

-- Perform and/or check the coding.

-- Perform the basic setting.

-- Read the Diagnostic Trouble Code (DTC) memory (and clear the input for the currently displayed entry).

-- Check the adaptation.

-- If necessary, perform the output diagnostic test.

scientia non olet · About LEMON Manuals