LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A6 2.0T >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Final Drive & Differential - Continuously Variable Transmission Internal Components 0AW >> 39 Final Drive, Differential >> Transmission Control >> Transmission Control Module, Removing And Installing >> Removing

Transmission Control Module, Removing And Installing: Removing

NOTE:

REPAIR INFORMATION .

GUIDELINES FOR CLEAN WORKING CONDITIONS .

-- Remove end cover. Refer to END COVER, REMOVING AND INSTALLING .

-- Remove the cover -A-, if equipped.

Fig 1: Identifying Cover
GWWA38-10213Courtesy of AUDI OF AMERICA, LLC

-- Remove screws -arrows- and pull out Transmission Control Module -J217- without tilting it.

Fig 2: Identifying Bolts And Transmission Control Module
GWWA38-10184Courtesy of AUDI OF AMERICA, LLC

-- Remove the double lip seal -B- from the Transmission Control Module -J217-.

NOTE:

Do not touch the pins in the connector -A-.

When positioning Transmission Control Module -J217-, make sure the sensor on the control module is not damaged.

scientia non olet · About LEMON Manuals