LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A3 2.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (2.0L - Ignition/Glow Plug System - Engine Code(S): BPY) >> Ignition/Glow Plug System >> Specifications >> Test Data

Test Data

WARNING: This page is about a different car, the 2008 Audi A3, 2007 Audi A3, and 2006 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Engine data 2.0L Turbo FSI engine
Idle speed Idle speed cannot be adjusted, it is regulated by idle stabilization 640 to 800 RPM
RPM limited by switching off fuel injectors and closing throttle valve Approximately 6500 RPM
Ignition timing is regulated by control module. It is not possible to adjust the ignition timing.  
Ignition/Glow Plug System Single coil ignition system with 4 ignition coils (output stages integrated), that are connected directly to spark plugs via the ignition cables; The ignition coils can be pulled out of the cylinder head using ignition coil puller T40039
Ignition sequence 1-3-4-2