Knock Sensor 1
WARNING: This page is about a different car, the 2008 Audi A3, 2007 Audi A3, and 2006 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Remove the electrical connector -2- from the knock sensor 1 -G61-.
Fig 1: Camshaft Position Sensor G40/Intake Manifold Runner Position Sensor G336, Knock Sensor (KS) 1 G61 & Fuel Injectors 8-Pin Harness Connector Electrical Harness Connectors
-- Remove the coolant pump with the coolant thermostat. Refer to COOLANT PUMP .
NOTE:
The knock sensor 1 is located below the intake manifold behind the coolant pump.
-- Remove the knock sensor 1.
Installing
-- Installation is in reverse order.
- Tightening specification, refer to IGNITION ASSEMBLY OVERVIEW