LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> S6 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> 5.2L - Generic Scan Tool - Engine Code: BXA >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 09 >> Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions >> OBDMID $71 (113): Secondary Air Injection (AIR) System 1 (Bank 1)

OBDMID $71 (113): Secondary Air Injection (AIR) System 1 (Bank 1)

-- Connect the scan tool.

-- Start the engine and let run at idle speed.

-- Select "Mode 6: Check test the results of components that are not continuously monitored".

Select "OBDMID 71 ($113)".

-- Select the desired "Test-ID".

-- Check specified values at idle.

Test-ID (TID) (Hex-ID) DTC Component or System Min. Max. Additional Information
128 ($80) P0491 Function Check. 0.0468 --- Refer to DTC P0491 in the DTC table Engine Control Module - P0491 .

-- If any of the components or systems fail to meet the specified values, refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure. Refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY .

-- Switch the ignition off.

-- End of diagnosis.

scientia non olet · About LEMON Manuals