Mode 06 - TID $01 (01): Catalytic Conversion (Bank 2)
- Connect the scan tool.
- Start the engine and let run at idle speed.
- Select "Mode 6: Check test the results of components that are not continuously monitored".
Select "Test-ID $01 (01):".
- Select the desired "Test-ID".
- Check specified values at idle.
| Test-ID (TID) (Hex-ID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| 02($02) | P0431 | Conversion Capability (storage) Check. | --- | >4.7 | Refer to DTC P0431 in Additional exhaust regulation . |
| 06($06) | P0431 | Conversion Capability (storage) Check. | --- | >4.7 | Refer to DTC P0431 in Additional exhaust regulation . |
| 09($09) | P0431 | Conversion Capability (storage) Check. | --- | >4.7 | Refer to DTC P0431 in Additional exhaust regulation . |
- If any component or system fails to meet the specified values, refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTCs or the corresponding diagnostic repair procedure.
- Switch the ignition off.