LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> 91 Communication >> Rearview Camera System >> Rearview Camera System Control Module -J772-, REMOVING AND INSTALLING >> Removing

Rearview Camera System Control Module -J772-, REMOVING AND INSTALLING: Removing

-- Remove the luggage compartment right side trim panel, refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .

-- Remove nuts -1- and -5-.

Fig 1: Identifying Nuts -1- And -5-, Rearview Camera System Control Module -2- And Connectors -3- And -4-
GWWA91-10496Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connectors -3- and -4- from the Rearview Camera System Control Module -J772-.

-- Remove Rearview Camera System Control Module -J772- -2-.

Removing retaining bracket

Two retaining brackets are bolted to the Rearview Camera System Control Module -J772-.

-- Remove the screws -5- and the bracket -1-.

Fig 2: Identifying Bolts -4 And 5-, Retaining Bracket -3-, Rearview Camera System Control Module -2- And Retaining Bracket -1-
GWWA91-10540Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -4- and the bracket -3-.