LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q5 >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> 3.2L - Generic Scan Tool - Engine Code(S): CALB (As Of 04.2009) >> Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 09 >> Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions >> Monitor-ID $71 (113) : Secondary air system Bank 1

Monitor-ID $71 (113) : Secondary air system Bank 1

-- Connect the scan tool.

-- Start the engine and run at idle.

-- Select "Mode 6: Check test the results of components that are not continuously monitored".

Select "Monitor-ID 113".

-- Select the desired "Test-ID (TID)" or "Hex-ID".

-- Check specified values at idle.

Test-ID (TID) (Hex-ID) DTC Component or System Min. Max. Additional Information
128 ($80) --- Examination secondary air system, examination for reduced secondary air mass. 0.398 counts 65535 counts ---
129 ($81) P2440 Examination secondary air valve leakage (combination valve does not close). 0 1.25 ---

-- If any components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .

scientia non olet · About LEMON Manuals