LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q5 >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> 3.2L - Generic Scan Tool - Engine Code(S): CALB (As Of 04.2009) >> Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 09 >> Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions >> Monitor-ID $36(54 : Cam Shaft Adjustment IVVT Bank 2

Monitor-ID $36(54 : Cam Shaft Adjustment IVVT Bank 2

-- Connect the scan tool.

-- Start the engine and run at idle.

-- Select "Mode 6: Check test the results of components that are not continuously monitored".

Select "Monitor-ID 54".

-- Select the desired "Test-ID (TID)" or "Hex-ID".

-- Check specified values at idle.

Test-ID (TID) (Hex-ID) DTC Component or System Min. Max. Additional Information
128 ($80) P0021 VVT diagnosis target position is not reached. 0 10.125 Refer to DTC P0021 in the DTC summary table. DTC TABLES 
129 ($81) P000C VVT diagnosis target position Slow Response 10.125 655.35 Refer to DTC P000C in the DTC summary table. DTC TABLES 
($82) 130 P0024 Camshaft Position Timing - Over-Advanced (Bank 1) 0 10.125 Refer to DTC P0024 in the DTC summary table. DTC TABLES 
($83) 131 P000D Camshaft Position Slow Response (Bank 2) 10.125 655.35 Refer to DTC P000D in the DTC summary table. DTC TABLES 

-- If any components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .

-- Switch the ignition off.

scientia non olet · About LEMON Manuals