Steering Column Electronics Control Module -J527-, Removing And Installing: Notes
Special Tools And Workshop Equipment Required
- Feeler Gauge
The Airbag Spiral Spring/Return Spring with Slip Ring -J527- and the Steering Angle Sensor -F138- are integrated in the Steering Column Electronics Control Module -G85-.
-- If replacing the control module, select the "Replace Control Module " function using the Vehicle Diagnostic Tester.
CAUTION:
Risk of damaging coil connector.
- Steering must be in center position (wheels in straight ahead position) when removing and installing coil connector with slip ring.
- Return spring with slip ring is not to be turned following removal.
WARNING:
Danger Of Unintended Engine Ignition
Turn off the ignition and remove the ignition key from the vehicle interior for all work performed on the high voltage vehicle.