Engine, Securing To Engine And Transmission Holder

Special tools and workshop equipment required

Lifting Tackle 2024 A
Engine and Transmission Holder VAS 6095 with Bracket VAS 6095/1-5
Shop Crane VAS 6100
Lift Arm Extension for Workshop Crane VAS 6101

Procedure

Engine separated from transmission. Refer to ENGINE AND MULTITRONIC TRANSMISSION, SEPARATING and ENGINE AND AUTOMATIC TRANSMISSION, SEPARATING .

-- Hook Engine Sling 2024 A onto engine and onto Workshop Crane VAS 6100 with Lift Arm Extension for Workshop Crane VAS 6101 as shown in the illustration.

Fig 1: Attaching Engine To Workshop Crane VAS 6101

Courtesy of AUDI OF AMERICA, LLC

NOTE:

To be aligned to the center of gravity of the engine assembly, the hole rails of the lifting hook must be inserted as shown in the illustration.

WARNING:

Lifting hooks and alignment pins on the engine sling must be secured with securing pins -arrows-.

-- Disconnect the connector -1- on the Left Electron-Hydraulic Engine Mount Solenoid Valve -N144-, if equipped.

Fig 2: Left Side Electro-Hydraulic Engine Mount, Remove/Install Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove bolts -arrows- and remove left engine mount.

NOTE:

Shown without engine mount bracket to provide a better illustration.

With manual and multitronic transmission:

-- Repeat work procedure on opposite side of the engine.

All Vehicles

-- Secure engine using Bracket VAS 6095/1-5 to 40 Nm Engine and Transmission Holder VAS 6095 as shown in illustration.

Fig 3: Identifying Engine, Holder VAS 6095 And Bracket For V6 FSI Engine VAS 6095/1-5

Courtesy of AUDI OF AMERICA, LLC