LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> A6 Base >> Repair and Diagnosis (Single Page) >> Transmission >> Transmission Control Systems >> 3.2L - Generic Scan Tool - Engine Code: BKH >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Mode 01 - 09 >> Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions >> Test-ID 33 ($21): Catalytic Converter Monitoring Bank 1

Test-ID 33 ($21): Catalytic Converter Monitoring Bank 1

-- Connect the scan tool.

-- Start the engine and let run at idle speed.

-- Select "Diagnostic Mode 06 - Checking test results of components that are not continuously monitored".

Select "Test-ID 33 ($21)".

-- Select the desired "Test-ID".

-- Check specified values at idle.

Test-ID (TID) (Hex-ID) DTC Component or System Min. Max. Additional Information
132 ($84) P0421 Conversion Capability (storage) Check --- > 0.6 Refer to DTC P0421 in the OBD DTC Summary Table for all monitoring values.Engine Control Module - P0421 
135 ($87) P0421 Conversion Capability (storage) Check --- > 0.6 Refer to DTC P0421 in the OBD DTC Summary Table for all monitoring values.Engine Control Module - P0421 

-- If any component or system fails to meet the specified values, refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY  to check for stored DTC's or the corresponding diagnostic repair procedure.

-- Switch the ignition off.

scientia non olet · About LEMON Manuals