Information Electronics Control Module 1 -J794-, Removing And Installing: Removing

-- Insert the two clips from the Radio Removal Tool:T10057  into the slots on the Information Electronics Control Module 1 -J794- until they engage. Points on the grip eyelets of tool face outward.

Fig 1: Insert Two Clips From T10057 Into Slots On Information Electronics Control Module Until They Engage

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Information Electronics Control Module 1 -J794- from the installation frame.

-- Remove the Radio Removal Tool:T10057  by pushing the locking tabs on Information Electronics Control Module 1 -J794-.

-- Release and disconnect the connectors from the Information Electronics Control Module 1 -J794-.

-- Insert the Fiber-Optic Repair Set - Connector Protective Caps:VAS6223 / 9  -1- onto the MOST Bus connector -2-.

Fig 2: Fiber-Optic Cable Harness Connector And Protective Cap For Cable Connector VAS 6223 / 9

Courtesy of AUDI OF AMERICA, LLC