Sequence of operations
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- Move seat backrest forward as far as it will go.
- Check current numerical value in measuring value block 002. See READ MEASURING VALUE BLOCK .
Indicated on display (values in example):
Fig 1: V.A.G 1551 Scan Tool (ST) Display - Seat Control Element Sequence Of Operations - Driver's Seat Adjustment With Memory Control Module
Display zone 4 shows current numerical value (in example 34231).
- Note down this numerical value.
- Use the memory buttons to move the seat to the position for which the remote control key is to be programmed.
- Keep memory button pressed and within 10 seconds additionally press "Open" button on remote control key.
- Then release memory button after approx. 2 seconds.
- To check function, press a different memory button and adjust seat.
- Lock vehicle.
- Unlock vehicle with remote control key.
After opening driver's door, seat must move to programmed position.