Implementing function "03 - Output Diagnostic Test Mode"
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- Press buttons -0- and -3-.
Indicated on display:
Fig 1: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (1 Of 16)
- Confirm entry with -Q- button.
Indicated on display:
Fig 2: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (2 Of 16)
Hazard warning lights are actuated.
- Press --> button.
Indicated on display:
Fig 3: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (3 Of 16)
- Press --> button.
Indicated on display:
Fig 4: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (4 Of 16)
Central locking control module transmits a signal for activating interior monitor.
NOTE:
Following activation of interior monitor, the system requires a waiting time of 30s. On alarm triggering, an entry is then made in the DTC Memory (1370; alarm via interior monitor).
- Press --> button.
Indicated on display:
Fig 5: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (5 Of 16)
- Press --> button.
Indicated on display:
Fig 6: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (6 Of 16)
Hazard warning lights and interior lighting are actuated.
- Press --> button
NOTE:
Output Diagnostic Test Mode is to be repeated with Airbag Control Module -J234-.
Indicated on display:
Fig 7: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (7 Of 16)
- Press --> button.
Indicated on display:
Fig 8: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (8 Of 16)
- Press --> button.
Indicated on display:
Fig 9: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (9 Of 16)
- Press --> button.
Indicated on display:
Fig 10: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (10 Of 16)
Open central locking switches to "Closed".
- Press --> button.
Indicated on display:
Fig 11: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (11 Of 16)
- Press --> button.
Indicated on display:
Fig 12: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (12 Of 16)
Vehicle cannot be opened from inside.
- Press --> button.
Indicated on display:
Fig 13: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (13 Of 16)
- Press --> button.
Indicated on display:
Fig 14: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (14 Of 16)
Closed central locking switches to "Open".
- Press --> button.
Indicated on display:
Fig 15: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (15 Of 16)
- Press --> button.
Tester returns to basic function.
Indicated on display:
Fig 16: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Function 03, Output Diagnostic Test Mode (16 Of 16)
- End Output (function 06). See END OUTPUT (FUNCTION 06) .