Overview - SUBFRAME Mount
WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 20 Nm
- Retaining Plate
- For the engine mount
- If the engine mount is faulty, replace the retaining plate
- Check the retaining plate on the opposite side; replace if necessary
- Bolt
- 40 Nm
- Engine Support
- Bolt
- 10 Nm
- Heat Shield
- Bolt
- 90 Nm +90° turn
- Replace
- Engine Mount
- Removing and installing, refer to LEFT ENGINE MOUNT, REMOVING AND INSTALLING and RIGHT ENGINE MOUNT, REMOVING AND INSTALLING .
- Replace in pairs
- Subframe
- Bolt
- 55 Nm
-- Tighten the nut -2- for the hydraulic oil hose bracket -1- to 9 Nm.