LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> A4 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (1.8L - Exhaust System, Emission Controls, Generic Scan Tool, Engine Code(S): AMB) >> Exhaust system, Emission controls >> Exhaust system components, removing and installing >> Notes

Exhaust system components, removing and installing: Notes

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Always replace gaskets and self-locking nuts.
  • After exhaust system repairs, make sure exhaust system is not under stress and has sufficient clearance from the body. If necessary, loosen clamps and align mufflers and exhaust pipes so that there is adequate distance to vehicle body, and weight is evenly distributed among the exhaust mounts.
  • Decoupling element in front exhaust pipe must not be bent more than 10°, otherwise it may be damaged.