LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> A4 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1213 (Module Communications Network (2 Of 2)) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> Pinpoint Test Ai : The PAM (Parking Assist Control Module) Does Not Respond To The Diagnostic Scan Tool (Active Park Assist Only) >> Notes

Pinpoint Test Ai : The PAM (Parking Assist Control Module) Does Not Respond To The Diagnostic Scan Tool (Active Park Assist Only): Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Wiring Diagram Module Communications Network for schematic and connector information.

Refer to Wiring Diagram Parking Aid for schematic and connector information.

Normal Operation and Fault Conditions 

The PAM communicates with the diagnostic scan tool through the HS-CAN1.

Possible Sources 

Visual Inspection and Diagnostic Pre-checks 

Verify BCM fuse 36 (15A) is OK.

scientia non olet · About LEMON Manuals