LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> A4 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1213 (Module Communications Network (2 Of 2)) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> Pinpoint Test AO : The SCMH (Passenger Multi-Contour Seat Module) Does Not Respond To The Diagnostic Scan Tool >> Notes

Pinpoint Test AO : The SCMH (Passenger Multi-Contour Seat Module) Does Not Respond To The Diagnostic Scan Tool: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Wiring Diagram Module Communications Network for schematic and connector information.

Refer to Wiring Diagram Power Seats for schematic and connector information.

Normal Operation and Fault Conditions 

The SCMH communicates with the diagnostic scan tool through the MS-CAN. Diagnostic messages are sent/received between the DLC and the diagnostic scan tool through the HS-CAN2 circuits at the DLC, and are translated through the GWM to the MS-CAN.

The multi-contour seat relay is integral to the BJB.

Possible Sources 

Visual Inspection and Diagnostic Pre-checks 

Verify BJB fuse 79 (10A) is OK.

scientia non olet · About LEMON Manuals