LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2008 >> S8 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> 5.2L - Generic Scan Tool, Engine Code(S): BSM [Ignition/Glow Plug System - Generic Scan Tool] >> ST - Generic Scan Tool >> Diagnostic modes >> Diagnostic Mode 05 - Check Lambda Test Results >> Diagnostic Mode 05 - Check Lambda Test Results

Diagnostic Mode 05 - Check Lambda Test Results

NOTE:
  • The diagnostic information for "Diagnostic Mode 5: check lambda test results" is not supported in this section of the 2007 S8 5.2L Generic Scan Tool (GST) service manual and has been moved to "Diagnostic Mode 6: Checking test results of components that are not continuously monitored" section.
  • Refer to "Diagnostic Mode 6: Checking test results of components that are not continuously monitored" for the static values of all oxygen sensors and all emission related components → Diagnostic Mode 06 - Read Test Results for Specific Diagnostic Functions  .
NOTE:
  • Depending on scan tool and protocol used, diagnostic mode 05 and the information provided may be referred to by a different name.
scientia non olet · About LEMON Manuals