Repair Information

Before performing repairs to the ABS, determine the cause of the malfunction via "Guided Fault Finding ".

Disconnect battery before working on ABS system.
When working with brake fluid, observe relevant safety precautions and notes. Refer to BRAKE SYSTEM, BLEEDING .
After finishing any work that required opening the brake system, bleed the brake system using the Brake Charger/Bleeder Unit VAS 5234 BRAKE SYSTEM, BLEEDING .
During final road test, carry out at least one ABS-controlled braking operation (appropriate pulsations must be felt at brake pedal).
Absolute cleanliness is required when working on the anti-lock brake system, it is not permitted to use any products which contain mineral oil, such as oils, greases etc.
Thoroughly clean all unions and the adjacent areas before loosening. Do not use aggressive cleaning agents such as brake cleaner, fuel, thinners or similar chemicals.
Place parts that have been removed on a clean surface and cover.
Carefully cover or seal open components, if repairs are not carried out immediately.
Only use lint-free cloths.
Only unpack replacement parts immediately prior to installation.
Only use parts in their original packaging.
Do not work with compressed air and do not move vehicle while the system is open.
Make sure that brake fluid does not enter harness connectors.