Selector Lever Position P Locking Lever, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal. Note the following:
-- Insert the locking lever and secure it with both left and right bearing bushings -2-.
-- Make sure the locking lever is working correctly.
- The emergency release lever -arrow- must move easily and can be moved up and down.
NOTE:
If will be difficult to move emergency release lever -arrow- if the bushings are installed incorrectly.
If the emergency release lever is difficult to move, ignition key removal lock will not work.
-- Install the shift gate. Refer to SHIFT GATE, REMOVING AND INSTALLING .