EVAP System
The following table provides quick links.
| → EVAP System, Checking for Leaks | |
| → EVAP Canister Purge Regulator Valve, Checking | |
| → Leak Detection Pump, Checking |
For all EVAP system component locations and hose routing. Refer to the appropriate service information .
For the EVAP system hose routing. Refer to the appropriate service information .
For all EVAP system removal/installation procedures and torque specifications. Refer to the appropriate service information .
Check the Technical Bulletins for information that may supersede any information included in this article.
NOTE:
- All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool or are available for purchase through Audi.
- Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.