Section 11 (Maintenance Procedures)
WARNING: This page is about a different variant/trim than selected.
- 01 - Maintenance
- Engine overview
- Delivery inspection
- Oil change service
- Inspection service
- Description of work
- All switches, all electrical components, all displays and other operating elements: Checking function
- Final drive (automatic transmission): Check oil level, add oil if necessary
- Battery: Check
- Battery: No load voltage, checking before starting engine for the first time
- Battery: Ensure battery cable fits securely
- Battery: Perform battery load test
- Brake system: Visual inspection for leaks and damage
- Brake pads: Checking thickness
- Tires: Checking condition, wear pattern and tread depth and adjusting tire pressure.
- Brake fluid level, dependent on lining wear: Check
- Brake fluid: Changing
- Set digital clock
- Electric windows: Check positioning
- DTC memory: Retrieving with VAS 5051/ 5052
- Check vehicle key function
- Front axle joints: Seal boots, checking play and secure fit.
- Noise insulation: Removing
- Power steering: Check for leaks and fluid level, top off power steering fluid, if necessary
- Rear lid hinges: Lubricate
- Calibrate rearview mirror with compass
- Instrument cluster: Adapt language version
- A/C system: Check function, set temperature to 72 F (22 C)
- Cooling system: Check freeze protection, add coolant, if necessary
- Ribbed belt: Replacing
- Air cleaner: Clean air filter housing and replace filter
- Hood catch: lubricating
- Engine cover: Removing
- Engine (from above and below) and engine compartment: Visual inspection for leaks and damage
- Continuously Variable Transmission (CVT) 01J: Changing ATF
- Engine oil: Drain/extract, replace oil filter
- Engine oil: Fill
- Engine: Oil level, checking
- Navigation: Eject button, unlocking
- Test drive: Perform
- Wheel bolts: Tighten to correct torque setting
- Radio: Activate anti-theft coding by entering security code
- Tire Pressure Monitoring System: Programming tire pressures
- Tire repair kit: Checking
- Windshield washer system: Checking nozzle setting, adjusting nozzles if necessary
- Headlamp washer system: Check spray jet setting.
- Windshield wiper blades: Checking park position
- Service interval display: resetting or adapting
- Windshield/headlamp wiper system: Filling with fluid
- Vehicle Electrical System Control Module - J519: coding
- Dust and pollen filter: Replacing
- Sunroof: Check function, clean guide rails and spray on lubricant spray
- Manual transmission/final drive: Check oil level, add oil if necessary
- Headlamps: Check setting, adjust if necessary
- Deactivate transport mode
- Door arrester and lock cylinder: Lubricate
- Plenum chamber cover: Removing
- Telematics: Emergency battery, replacing
- Transport protection: Remove front and rear strut transportation protection devices
- Underbody protection: Visual inspection for damage
- Winter tires from factory
- Timing belt: Replacing
- Spark plugs: Replacing
- Headlights: Aiming using Hella Universal Beamsetter IV
- RAPGARD: Inspection, removal and disposal
- Type plate / Vehicle Identification Number (VIN)
- Vehicle, lifting
- Tow starting/towing
- Vehicle checks within inspection and service framework