Speech Input Control Module J507 , removing and installing

Turn off all electrical components.
Remove ignition key.

Removing

Remove right A-pillar trim → - 70 - INTERIOR TRIM .
Remove right front seat → - 72 - SEAT - FRAMES .

NOTE:

Safety belt on seat frame must not be loosened.
Fold back the floor mat → - 70 - INTERIOR TRIM .

Fig 1: Identifying Passenger Side Electronics Box Cover

GW00021458

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Release electronics box cover - arrows - and remove it.

Fig 2: Identifying Connector For Speech Input Control Module J507

GW00021551

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect connector - 2 - on Speech Input Control Module J507 - 1 -.
Remove Speech Input Control Module J507 - 1 -.

Installing:

Install in reverse order.
Perform adaptations and coding on Speech Input Control Module J507 if necessary.