Diagnostic Mode 06: Checking Test Results of Components that are not Continuously Monitored: Notes

WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostic Mode 06 displays the test results of emission related components and systems which are not continuously monitored.

The values of the individual test results must reach the specified value or must be within the min. and max. limits.

NOTE:

Depending on diagnostic tester and protocol used, the information displayed in diagnostic mode 06 may be referred to by different names such as Test-ID (TID), Hex-ID, Component-ID (CID), or On-Board Diagnostic Monitor Identifier (OBDMID).

Test requirements

Exhaust system must be properly sealed between catalytic converter and cylinder head.
No DTCs in the DTC memory.
Coolant temperature at least 80°C.

Work procedure

Connect the diagnostic tester.
Start the engine and let run at idle speed.
Select "Mode 6: Check test the results of components that are not continuously monitored".

Select the desired "Test-ID".

The current minimum and maximum values will be displayed on the diagnostic tester screen.

Test-ID (Hex-ID)	Component or System
01 ($01): Test-ID 01 ($01): Oxygen Sensor Monitor Bank 1 - Sensor 1	Oxygen Sensor Monitor Bank 1 - Sensor 1
02 ($02): Test-ID 02 ($02): Oxygen Sensor Monitor Bank 1- Sensor 2	Oxygen Sensor Monitor Bank 1 - Sensor 2
05 ($05): Test-ID 05 ($05): Oxygen Sensor Monitor Bank 2 - Sensor 1	Oxygen Sensor Monitor Bank 2 - Sensor 1
06 ($06): Test-ID 06 ($06): Oxygen Sensor Monitor Bank 2 - Sensor 2	Oxygen Sensor Monitor Bank 2 - Sensor 2
33 ($21): Test-ID 33 ($21): Catalyst Monitor Bank 1	Catalyst Monitor Bank 1
34 ($22): Test-ID 34 ($22): Catalyst Monitor Bank 2	Catalyst Monitor Bank 2
$3A (58): $3A (58): Fuel Tank EVAP System Leak Test (0.090)	Fuel Tank EVAP System Leak Test (0.090)
59 (3B): Test-ID 59 (3B): EVAP Monitor (0.040)	EVAP Monitor (0.40)
60 (3C): Test-ID 60 (3C): EVAP Monitor (0.020)	EVAP Monitor (0.20)
61 (3D): Test-ID 61 (3D): Purge Flow Monitor	Purge Flow Monitor
65 ($41): Test-ID 65 ($41): Oxygen Sensor Heater Monitor Bank 1 - Sensor 1	Oxygen Sensor Heater Monitor Bank 1 - Sensor 1
66 ($42): Test-ID 66 ($42): Oxygen Sensor Heater Monitor Bank 1 - Sensor 2	Oxygen Sensor Heater Monitor Bank 1 - Sensor 2
69 ($45): Test-ID 69 ($45): Oxygen Sensor Heater Monitor Bank 2 - Sensor 1	Oxygen Sensor Heater Monitor Bank 2 - Sensor 1
70 ($46): Test-ID 70 ($46): Oxygen Sensor Heater Monitor Bank 2 - Sensor 2	Oxygen Sensor Heater Monitor Bank 2 - Sensor 2
162 ($A2): Test-ID 162 ($A2): Mis-Fire Cylinder 1 Data	Mis-Fire Cylinder 1 Data
163 ($A4): Test-ID 163 ($A4): Mis-Fire Cylinder 2 Data	Mis-Fire Cylinder 2 Data
164 ($A4): Test-ID 164 ($A4): Mis-Fire Cylinder 3 Data	Mis-Fire Cylinder 3 Data
165 ($A5): Test-ID 165 ($A5): Mis-Fire Cylinder 4 Data	Mis-Fire Cylinder 4 Data
166 ($A4): Test-ID 166 ($A4): Mis-Fire Cylinder 5 Data	Mis-Fire Cylinder 5 Data
167 ($A7): Test-ID 167 ($A7): Mis-Fire Cylinder 6 Data	Mis-Fire Cylinder 6 Data