Engine Coolant Temperature Sensor -G62- Connector Assignment: Notes

Special tools and workshop equipment required 

• Assembly Tool T10118

Procedure 

-- Disconnect electrical harness connector at Engine Coolant Temperature Sensor -G62- ; procedure:

• Vehicles with 3.2L FSI engines, refer to ENGINE COOLANT TEMPERATURE SENSOR CONNECTOR, DISCONNECTING .
• Vehicles with 3.0L TFSI engine, refer to COOLANT TEMPERATURE SENSOR ELECTRICAL CONNECTOR, DISCONNECTING .
• Vehicles with 4.2L MPI engine, refer to ENGINE COOLANT TEMPERATURE SENSOR, DISCONNECTING ELECTRICAL CONNECTOR .
• Vehicles with 4.2L FSI engine, refer to COOLANT TEMPERATURE SENSOR ELECTRICAL CONNECTOR, DISCONNECTING .
• Vehicles with 5.2L FSI engine, refer to COOLANT TEMPERATURE SENSOR ELECTRICAL CONNECTOR, DISCONNECTING .

Terminal assignment of the 2-pin harness connector at Engine Coolant Temperature Sensor -G62-

1. Sensor ground (GND)
2. Wire connection from engine coolant temperature sensor to engine control module

2-pin connector assignment on Engine Coolant Temperature Sensor On Radiator -G83-

1. Sensor ground (GND)
2. Wiring connection from engine coolant temperature sensor on radiator to engine control module