Windshield Wipers, Bringing Into Service Position
Observe notes on contact corrosion. Refer to CONTACT CORROSION .
NOTE:
If windshield wiper motor should run during procedure, hood must be completely closed. Otherwise, voltage supply to wiper motor is interrupted.
-- Make sure the wiper blades are not frozen.
-- Switch on ignition.
-- Using the "multimedia system control head", activate the menu entry windshield wiper "on". Refer to the Owner's Manual.
- The windshield wipers run into service position.
-- Turn off the ignition.
CAUTION:
Risk of damaging the hood by running the wipers back in basic position.
- Do not drive a vehicle with windshield wiper arms folded up.
- The windshield wipers automatically go back into their rest position when the wiper switch is activated or when driving faster than 6 km/h.