LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2007 >> A4 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (2.0L - Turbo Generic Scan Tool - MOTRONIC Fuel Injection System, Ignition System, Engine Code: BPG) >> ST Generic Scan Tool >> Diagnostic modes >> Diagnostic Mode 05: Check lambda test results

Diagnostic Mode 05: Check lambda test results

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • The diagnostic information for "Diagnostic Mode 5: check lambda test results" is not supported in this section of the 2005 Audi A4 2.0L TFSI Generic Scan Tool (GST) service manual and has been moved to "Diagnostic Mode 6: Checking test results of components that are not continuously monitored" section.
  • Refer to "Diagnostic Mode 6: Checking test results of components that are not continuously monitored" for the static values of all oxygen sensors and all emission related components → Diagnostic Mode 06: Checking test results of components that are not continuously monitored .
NOTE:
  • Depending on diagnostic tester and protocol used, diagnostic mode 05 and the information provided may be referred to by a different name.
scientia non olet · About LEMON Manuals