Implementing function "04 - Basic setting"

Indicated on display:

Fig 1: V.A.G 1551 Scan Tool (ST) Display - Driver's Seat Adjustment With Memory Control Module, Basic Setting, Function 04 (1 Of 6)

Courtesy of AUDI OF AMERICA, INC.

• Press buttons -0- and -4-.

Indicated on display:

Fig 2: V.A.G 1551 Scan Tool (ST) Display - Driver's Seat Adjustment With Memory Control Module, Basic Setting, Function 04 (2 Of 6)

Courtesy of AUDI OF AMERICA, INC.

• Confirm entry with -Q- button.

Indicated on display:

Fig 3: V.A.G 1551 Scan Tool (ST) Display - Driver's Seat Adjustment With Memory Control Module, Basic Setting, Function 04 (3 Of 6)

Courtesy of AUDI OF AMERICA, INC.

• Press buttons -0-, -0- and -1-.

Indicated on display:

Fig 4: V.A.G 1551 Scan Tool (ST) Display - Driver's Seat Adjustment With Memory Control Module, Basic Setting, Function 04 (4 Of 6)

Courtesy of AUDI OF AMERICA, INC.

• Confirm entry with -Q- button.

Indicated on display:

Fig 5: V.A.G 1551 Scan Tool (ST) Display - Driver's Seat Adjustment With Memory Control Module, Basic Setting, Function 04 (5 Of 6)

Courtesy of AUDI OF AMERICA, INC.

• This concludes basic setting.
• Press --> button.

Indicated on display:

Fig 6: V.A.G 1551 Scan Tool (ST) Display - Driver's Seat Adjustment With Memory Control Module, Basic Setting, Function 04 (6 Of 6)

Courtesy of AUDI OF AMERICA, INC.

• Then check display value 4 in measuring value block 002.

  Display must show mean counter value (32767).

• Check basic setting as follows:
• Move seat backrest to rear as far as it will go.
• Press memory button and one of the personalized buttons (e. g. memory position 1).
• Then press memory position button selected above (e.g.: 1) again with driver's door open. Backrest moves to rear stop, leaving a safety clearance with respect to rear seat bench (leg room for rear passenger).