Implementing function "10 - Adaptation"

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Indicated on display:

Fig 1: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Adaptation, Function 10 (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -1- and -0- to select "Adaptation" function.
Confirm entry with -Q- button.

Indicated on display:

Fig 2: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Adaptation, Function 10 (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Confirm entry with -Q- button.

Indicated on display:

Fig 3: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Adaptation, Function 10 (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Enter desired adaptation channel.
Confirm entry with -Q- button.

NOTE: After changing adaptation value/following termination of an adaptation channel, function "10 - Adaptation" must be implemented again to select a different adaptation channel.