Mode 4: Reset/erase diagnostic data: Notes
WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
The following functions are performed in this diagnostic mode:
- All emission relevant malfunctions in DTC memory will be erased.
- The operating conditions at which a malfunction was stored will be reset. See MODE 2: CHECKING OPERATING CONDITIONS .
- All adaptation values will be reset.
- All test results of the diagnostic functions of control module will be reset.