LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2007 >> A3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (3.2L - Generic Scan Tool - Engine Code(S): Bub) >> St Generic Scan Tool >> Description And Operation >> MOTRONIC Fuel Injection System >> Engine Coolant Temperature Sensor, Checking >> Testing if display approx. 140.0° C:

Testing if display approx. 140.0° C:

WARNING: This page is about a different variant/trim than selected.

-- Disconnect the Engine Coolant Temperature (ECT) Sensor -G62- electrical harness connector -1-.

Fig 1: Identifying Engine Coolant Temperature (ECT) Sensor (On Radiator) Electrical Harness Connector
GWWA10-1568Courtesy of AUDI OF AMERICA, LLC

If indication jumps to approx. -40.0° C:

-- End diagnosis and switch ignition off.

-- Replace theEngine Coolant Temperature (ECT) Sensor - G62-.

If indication remains at approx. 140.0° C:

scientia non olet · About LEMON Manuals