LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2007 >> A3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (3.2L - Generic Scan Tool - Engine Code(S): Bub) >> St Generic Scan Tool >> Description And Operation >> Exhaust System >> Exhaust System Components, Removing And Installing

Exhaust System Components, Removing And Installing

WARNING: This page is about a different variant/trim than selected.

For all Exhaust System, Emission control component locations. Refer to Repair information

For all Exhaust System, Emission control removal/installation procedures and torque specifications. Refer to Repair information

NOTE:

Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.

All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool or are available for purchase through Audi.

scientia non olet · About LEMON Manuals