Minimum Curing Times
WARNING:
- For safety reasons, use only electrically non-conductive 2K-adhesive when installing windshield and rear window using the materials listed below.
- The vehicle can only be used after the minimum curing time has elapsed.
| Window type | Vehicle | Adhesive sealing material | Curing time in hours |
|---|---|---|---|
| Windshield | With airbag | DA 004 600 A2 | 3 |
| Rear window | DA 004 600 A2 | 3 | |
| Side windows | DH 009 100 03 | 3 |
Adhesive Sealant, Removing from Window
It is recommended to use adhesive remover D 002 000 10 as a cleaning solution. Follow the safety precautions when using it.
WARNING:
When cleaning from vehicle interior out, the window just installed must not be pressed outward.
Paint Surfaces:
-- Clean the painted surface with a dry cloth. Clean off any dirt with adhesive remover D 002 000 10.
Plastic Trim:
-- Allow the adhesive sealant to harden (approximately 1 hour) and then peel it off.