Engine, Checking Oil Level: Checking

NOTE:

For oil specifications and capacities, refer to AUDI A6/S6

Vehicle must be in level position.

After stopping engine, wait a few minutes to allow oil to flow back into oil pan.

-- Pull out oil dipstick and wipe with clean rag. Replace dipstick and push down to stop.

-- Pull out dipstick again and read oil level.

Markings on dipstick:

Fig 1: Identifying Markings On Dipstick

Courtesy of AUDI OF AMERICA, LLC

Fig 2: Identifying Max Oil Level Marking

Courtesy of AUDI OF AMERICA, LLC

a -Oil must not be topped off.

b -Add oil. This will cause oil level to be in area -a-.

c -Add oil. It is sufficient when oil level is in area -b- (grooved field).

NOTE:

Oil level must not exceed -a- mark on dipstick.