1.8L - Turbo Engine Mechanical, Engine Code(S): AMB
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Engine, disassembling and assembling
- Lock carrier, moving to service position
- Lock carrier in service position, overview
- Ribbed belt for generator, vane pump and air conditioner compressor
- Ribbed belt, removing and installing
- Bracket for generator, power steering pump and air conditioning compressor, removing and installing
- Toothed belt drive, overview
- Toothed drive belt, removing, installing and tensioning
- Toothed drive belt, removing from camshaft sprocket
- Sealing flanges and flywheel/drive plate, removing and installing
- Crankshaft, removing and installing
- Pistons and connecting rods, disassembling and assembling
- Engine, disassembling and assembling
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder head, removing and installing
- Valve gear, servicing
- Camshaft timing control, checking
- 17 - Engine - Lubrication
- 19 - Engine - Cooling system
- Cooling system components, removing and installing
- 21 - Turbocharger, G-Charger
- Charge air pressure system with turbocharger, checking
- Charge air pressure system with turbocharger, checking
- Safety precautions
- Boost pressure regulation and vacuum control system, connection diagram for vehicles up to 06.03
- Boost pressure regulation and vacuum control system, connection diagram for vehicles as of 07.03
- Turbocharger and charge pressure control valve, checking
- Effects of leakage at intake and exhaust end
- Charge pressure leak test with VAG1687
- Intake system, checking for leaks using Diagnostic Tool VAG1687
- Notes
- Special tool VAG1687 Charge air system tester preliminary set-up
- Special tool VAG 1687/1 pressure adapter, installing (1.8L Turbo)
- Special tool KLI9210 (Evaporative system leak detector), connecting to 1.8L Turbo
- Special tool LKI9210 (Evaporative system leak detector), preliminary set-up
- Special tool VAG1687 , connecting to pressure adapter VAG1687/1 (1.8L Turbo)
- Performing pressure test
- Effects of leakage at exhaust end
- Mechanical air recirculation valve, checking
- Recirculating valve for turbocharger N249 , checking
- Wastegate bypass regulator valve N75 , checking
- Charge air pressure sensor G31 , checking
- Intake system, checking for leaks using Diagnostic Tool VAG1687
- Charge air system with turbocharger, servicing
- Charge air pressure system with turbocharger, checking
- 26 - Exhaust system, Emission controls
- Exhaust system components, servicing
- Exhaust system components, servicing
- Exhaust system components, removing and installing (Front wheel drive vehicles)
- Exhaust system components, removing and installing (All wheel drive vehicles)
- Center and rear mufflers, separating
- Exhaust manifold, removing and installing
- Catalytic converter, removing and installing
- Front exhaust pipe, removing and installing
- Exhaust system - vehicles with front wheel drive, aligning stress-free
- Exhaust system - vehicles with all wheel drive, aligning stress-free
- Exhaust system, checking for leaks
- Secondary air system, checking
- Secondary air system, checking
- Secondary Air Injection (AIR) solenoid valve N112 , checking
- Secondary Air Injection (AIR) pump relay J299 and Secondary Air Injection (AIR) pump motor V101 , checking
- Function and tightness of secondary air combination valve, checking
- Secondary air combination valve, removing and installing
- Exhaust system components, servicing