LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2005 >> A8 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (5.2L - Generic Scan Tool, Engine Code(S): BSM [Ignition/Glow Plug System - Generic Scan Tool]) >> ST - Generic Scan Tool >> Diagnostic modes >> Diagnostic Mode 05 - Check Lambda Test Results >> Diagnostic Mode 05 - Check Lambda Test Results

Diagnostic Mode 05 - Check Lambda Test Results

WARNING: This page is about a different car, the 2009 Audi S8, 2008 Audi S8, and 2007 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The diagnostic information for "Diagnostic Mode 5: check lambda test results" is not supported in this section of the 2007 S8 5.2L Generic Scan Tool (GST) service manual and has been moved to "Diagnostic Mode 6: Checking test results of components that are not continuously monitored" section.
  • Refer to "Diagnostic Mode 6: Checking test results of components that are not continuously monitored" for the static values of all oxygen sensors and all emission related components → Diagnostic Mode 06 - Read Test Results for Specific Diagnostic Functions  .
NOTE:
  • Depending on scan tool and protocol used, diagnostic mode 05 and the information provided may be referred to by a different name.
scientia non olet · About LEMON Manuals