Interrogating the Fault Memory
WARNING: This page is about a different variant/trim than selected.
Procedure
- Connect the scan tool.
- Switch the ignition to the "ON" position.
- Select "Diagnostic Mode 03: Interrogating fault memory ".
- The stored DTC or DTCs will be displayed on the scan tool screen.
The following table is an example of the DTC information that may be displayed on the scan tool screen:
| Indication example | Explanation |
|---|---|
| P0444 | SAE Diagnostic Trouble Code (DTC) |
| Evaporative Emission (EVAP) Canister Purge Regulator Valve | Malfunctioning wiring path or malfunctioning component |
| Circuit Open | Malfunction type as next |
- Refer to the following DTC tables for the diagnostic repair procedure:
- SAE P0xxx DTCs. → SAE P0xxx DTCs .
- SAE P1xxx DTCs → SAE P1xxx DTCs .
- SAE P2xxx DTCs. → SAE P2xxx DTCs .
- SAE P3xxx DTCs. → SAE P3xxx DTCs .
- SAE U0xxx DTCs, → SAE U0xxx DTCs .
- Switch the ignition off.
End of procedure