Ignition, Servicing
WARNING: This page is about a different car, the 2009 Audi S8, 2008 Audi S8, and 2007 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
→ Camshaft Position Sensor, Checking
→ Camshaft Adjustment Valve, Checking
→ Ignition Coils With Power Output Stage, Checking
For all Ignition/Glow plug system component locations. Refer to →
For all Ignition/Glow plug system removal/installation procedures and torque specifications. Refer to →
Check the Technical Bulletins for information that may supersede any information included in this article.
NOTE:
- All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool .
- Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.