Torque specifications
NOTE:
- Torque specifications only apply to lightly greased, oiled, phosphated or blackened nuts and bolts.
- Additional lubricants, such as engine or transmission oil are permissible, although lubricants containing graphite are not.
- Do not use any degreased parts.
- Tolerance for torque specifications ± 15%.
Alignment sleeves (- A - and - B -).
| Bolted connections | Torque specifications | |
|---|---|---|
| Engine mount to torque support valve N382 | 40 Nm | |
| Generator to engine | M10 | 40 Nm |
| M 8 | 25 Nm | |
| Exhaust manifold to cylinder head | 25 Nm | |
| A/C compressor to bracket | 25 Nm | |
| Bracket for central hydraulic pump and A/C compressor to engine | 25 Nm | |
| Drive axles to flange shafts | M 10 | 77 Nm |
| Exhaust pipe to exhaust manifold | 40 Nm | |
| Transmission mount to subframe | 40 Nm | |
| Wheel bolt to wheel hub | 120 Nm | |
| Engine carrier to engine mount | 23 | |
| Engine carrier to chassis | 68 | |