| In-Line4,1.8L Eng,AWD,5 Spd Trans | | 8.5 | | C |
| Combination Procedure: CLUTCH PILOT BEARING: Replace: |
| | 0.7 | | C |
| Combination Procedure: CLUTCH PRESSURE PLATE &/OR DISC: Replace: |
| | 0.6 | | C |
| Combination Procedure: CLUTCH RELEASE BEARING: Replace: |
| | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Replace: |
| In-Line4, Rear | Includes: R&I Oil Pan. | 3.6 | | B |
| Combination Procedure: FLYWHEEL: Remove & Install or Remove & Replace: |
| | 0.9 | | C |
| Combination Procedure: INPUT SHAFT SEAL: Replace: |
| | 0.3 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.4 | | C |